Slipway Services

Newport Marine is located within the Royal Motor Yacht Club and can provide you with  three slipways with a capacity of up to 100 tonnes and able to accommodate boats up to a length of 85 feet.

Pittwater Boat Repairs | Slipway Services Brass PropellerA comprehensive boat maintenance service includes slipping and antifouling and airless spray paint application using only the best products – International Paints, Altex and Propspeed to name a few.

While your boat is being looked after on the bottom we can organise for boat detailing to maintain or re-new the condition of your boat with a wax and polish to your topsides, superstructure and flybridge.

Whether you need propeller balancing, shaft or bearing repairs or bow and stern thruster installations NMS can do it for you.

Our hardstand and slipway area is maintained to the highest standard by following an environmentally sound process which is maintained daily. We adhere to strict environmental guidelines and regulations in conjunction with the EPA to ensure the beautiful clear waters of Pittwater are kept pristine.

Slipway Prices

Please see our slipway prices below (environmental levies are included in all prices shown):

Length Total cost Length Total cost
20-25 ft $1,277 57 ft $4,880
26 ft $1,324 58 ft $5,007
27 ft $1,370 59 ft $5,160
28 ft $1,424 60 ft $5,663
29 ft $1,470 61 ft $5,748
30 ft $1,665 62 ft $5,847
31 ft $1,722 63 ft $5,938
32 ft $1,779 64 ft $6,046
33 ft $1,838 65 ft $6,127
34 ft $1,895 66 ft $6,249
35 ft $1,958 67 ft $6,370
36 ft $2,016 68 ft $6,492
37 ft $2,299 69 ft $6,615
38 ft $2,369 70 ft $7,635
39 ft $2,432 71 ft $7,750
40 ft $2,508 72 ft $7,865
41 ft $2,584 73 ft $7,983
42 ft $2,715 74 ft $8,102
43 ft $2,840 75 ft $8,224
44 ft $2,942 76 ft $8,347
45 ft $3,065 77 ft $8,473
46 ft $3,157 78 ft $8,599
47 ft $3,255 79 ft $8,728
48 ft $3,300 85 ft $9,356
49 ft $3,506
50 ft $3,805
51 ft $3,905
52 ft $4,002
53 ft $4,174
54 ft $4,359
55 ft $4,591
56 ft $4,704

Price Includes – Carefully slipping your boat. Removing anodes and any scoops or grates that are removable. High pressure water cleaning. Wet rubbing the entire underwater surface and preparing running gear. Applying hard antifoul to running gear and spray application of Altex No. 5, No. 10 or Micron Extra antifouling. Refitting of grates, scoops and anodes.

Please note that supply of anodes and application of Propspeed is extra. There may also be extra charges for heavy shell, bow and stern thruster, swim platforms and similar.

This price guide is based on an average size boat (i.e. Riviera, Mariner, Bertram etc). Boats may differ in volume for their length and the price will be adjusted accordingly. If you own a multi-hull please expect an increase of 20%.

Be Sociable, Share!